 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| YAGEO CORPORATION LEADED RESISTORS Cement Resistors AXIAL LEAD TYPE Standard Type[SQP Series], Non-Inductive Type[NSP Series] FEATURES Exceptionally Small and Sturdy; Mechanically Safe. Excellent Electrical Characteristics Resistance Tolerance: 5% Applicable Specifications: EIA RS-344 and EIA RC-649 DERATING CURVE INTRODUCTION * The materials used and the construction techniques ensure excellent flame resistance, arc resistance and moisture resistances as well as self-extinguishing capabilities. They will withstand the most rigorous loading test * As resistors in radio and television receivers, the hazardous conditions of smoking and redheat can be completely prevented by the proper choice of power resistors Temperature Rise (C) 250 200 150 100 50 0 0 20 40 60 80 100 120 20W 15W 10W 7W 5W 3W 2W Rated Load (%) 100 80 60 40 25 40 70 155 2W 275 3W-5W 7W-10W 15W-20W 20 0 -50 0 50 100 150 200 250 300 Ambient Temperature (C) TEMPERATURE RISE Rated Load (%) DIMENSIONS STYLE SQP200 383. Unit : mm L 18 1.0 22 1.5 22 1.5 35 1.5 48 1.5 48 1.5 60 2.0 W 6.5 1.0 8.0 1.0 9.5 1.0 9.5 1.0 9.5 1.0 12.5 1.5 12.5 1.5 H 6.5 1.0 8.0 1.0 9.0 1.0 9.0 1.0 9.0 1.0 12.5 1.5 12.5 1.5 od 0.8 0.05 0.8 0.05 0.8 0.05 0.8 0.05 0.8 0.05 1.0 0.05 1.0 0.05 L 383. W H SQP300 SQP500 od SQP700 SQP10A SQP15A SQP20A 24 Note : ELECTRICAL CHARACTERISTICS STYLE Power Rating Operating Temp. Range Maximum Working Voltage Maximum Overload Voltage Dielectric Withstanding Voltage Value Range 5% (Wirewound) Value Range 5% (Metal Oxide Film) Temperature Coefficient SQP200 2W SQP300 3W SQP500 5W SQP700 7W SQP10A 10W SQP15A 15W SQP20A 20W -55C to +155C 250V 500V 500V 0.15~100 110~10K 300ppm/C 350V 700V 700V 0.3~120 130~22K 350V 700V 700V 0.3~180 200~33K 500V 1000V 1000V 0.5~220 240~10K 500V 1000V 1000V 1~270 300~10K 500V 1000V 1000V 500V 1000V 1000V * 1. Standard resistance is as the above list, below or over this resistance on request. * 2. Non-Inductive type up to 50 only. ENVIRONMENTAL CHARACTERISTICS PERFORMANCE TEST Short Time Overload Dielectric Withstanding Voltage Temperature Coefficient of Resistance Insulation Resistance Solderability Resistance to Solvent Terminal Strength Pulse Overload Load Life in Humidity Load Life Temperature Cycling Resistance to Soldering Heat TEST METHOD JIS-C-5202 5.5 JIS-C-5202 5.7 JIS-C-5202 5.2 JIS-C-5202 5.6 JIS-C-5202 6.5 JIS-C-5202 6.9 2.5 Times RCW V for 5 Seconds in V-Block for 60 Seconds -55C to +155C in V-Block 235C for 5 0.5 Seconds Trichroethane for 1 Min. with Ultrasonic APPRAISE (2%+0.05) by Type 300ppm/C >100M 95% Min. Coverage No Deterioration of Coatings and Markings 2.5kg (24.5N) (2%+0.05) (5%+0.05) (5%+0.05) (2%+0.05) (1%+0.05) Direct Load for 10 Sec. in The Direction of The Terminal Leads JIS-C-5202 5.8 JIS-C-5202 7.9 JIS-C-5202 7.10 JIS-C-5202 7.4 JIS-C-5202 6.4 4 Times RCW V 10000 Cycles (1 Sec. on , 25 Sec. off) 40 2C, 90~95% RH at RCW V for 1000 Hrs. (1.5 Hrs. on , 0.5 Hrs. off ) 70C at RCW V for 1000 Hrs. (1.5 Hrs. on , 0.5 Hrs. off) -55C Room Temp. +155C Room Temp. for 5 Cycles 350C 10C for 3 0.5 Seconds * Rated Continuous Working Voltage (RCW V)= Power Rating x Resistance Value |
Price & Availability of SQP200
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |